Tag with Comprehensive FAQs
Installation, usage time, and daily maintenance methods and steps are as follows:
1. Before installing the ribbon, turn the gear several times in the specified direction. After installing the ribbon, turn it several more times to check if the ribbon is installed correctly and if the core is running normally. Otherwise, the ribbon is easily damaged.
2. Low-density cores are suitable for 9-pin printers. Generally, they should not be used for 24-pin printers, otherwise the ribbon life will be greatly shortened.
3. Do not print for a long time. Long-time printing will cause wear and tear of the print head and affect the life of the print head and printer.
4. The print head needs to be cleaned and maintained frequently. After prolonged use, the print head should be removed and cleaned slowly with alcohol to avoid damage.
FAQ 1
What is the maximum number of characters that can be printed?
Up to 62 characters can be printed on one label.
A triangle symbol will appear on the LCD screen when the character input limit is reached, indicating that no more characters can be entered.
Frequently Asked Questions about Brother Label
The RL-B-Fx-T231 cannot be used in the PT-E115 machine.
The RL-B-Fx-T231 ribbon cannot be used in the PT-E115 machine; a product with a chip is required.
Frequently Asked Questions about Delta Labels
Why does the ribbon come out with the D1 label when I print labels?
The ribbon in the label cassette may be loose. Remove the label cassette from the label printer and ensure that the ribbon is snug against the label. If the ribbon is loose, turn the black spool in the label cassette clockwise to tighten it until the ribbon is snug against the label. The ribbon in the label cassette may be damaged or torn. If damaged or torn, replace the label cassette.
Frequently Asked Questions about Betty Label Tape
If one or more vertical lines are found on the label surface, how should they be handled?
Please clean the print head. If the fault persists, the print head is considered damaged and needs to be replaced.
If there are multiple slanted white lines on the label surface, how can this be resolved?
This problem occurs due to carbon ribbon wrinkles. Please adjust the left-right balance performance of the carbon ribbon.
The carbon ribbon and label are correctly matched, but no text can be printed, and no errors are reported on the printer or computer end. How can this be resolved?
Please check the carbon powder layer of the carbon ribbon to see if it is inner carbon or outer carbon, and then determine the correct installation path.
Frequently Asked Questions
Ribbon breakage
Excessive tension on the ribbon, causing the stitching to break or the print hammer to damage the ribbon, resulting in ribbon breakage. In the former case, the broken part can be cut off and re-stitched; in the latter case, simply replace the ribbon.
Already
2640
People submit messages
Filling in your phone and E-mail information will help us to get in touch with you in time and solve your problems as soon as possible.
24-hour advisory hotline
Electronic E-mail
Address
No.3883 Zhuhai Avenue, Xiangzhou District, Zhuhai, Guangdong, P.R. China
Focus on us
Nasda Label Print Public Number
